Connecting To A 100-Pin Lcc Socket - Renesas Emulation Probe for M32C/87 Group M30870T-EPB User Manual

M30870T-EPB User's Manual

2.9.1 Connecting to a 100-pin LCC Socket

When connecting the emulation probe to a 100-pin LCC socket (Yamaichi Electronics Co., Ltd.: IC61-1004-051 etc.) on the
user system, following the procedure below.
(1) Attach the CN2 side of the M30870T-EPB to the CN2 side of the M30800T-PTC.
(2) Attach the M30800T-PTC to the 100-pin LCC socket.
Figure 2.8 Connecting to a 100-pin LCC socket
Notes on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator
and user system.
The small connectors of the M30870T-EPB and M30800T-PTC are guaranteed for only 50 insertion/removal
iterations.
For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.
http://www.yamaichi.co.jp/e/index.shtml
REJ10J0482-0300 Rev.3.00 February 16, 2006
M3T-FLX160-EPB
M30870T-EPB
CN2 side
(1)
M30800T-PTC
(2) 100 -pin LCC socket
No. 1 pin
User system
CAUTION
2. Setup
Page 30 of 104