External Trigger Signal Input/Event Output Connectors - Renesas PC7501 User Manual

3.3.2 External Trigger Signal Input/Event Output Connectors

For the external trigger signal input/event output connector, insert the external trigger signal input/
event output cable shown in Figure 3.6. The external trigger signal input/event output cable is a
9-pin cable, inputs the external trigger signal, and outputs the break signal and event signal.
The external trigger signal input/event output signal is input/output at CMOS (LVCC3245) level.
Break signals are held low when the break conditions are satisfied. And, event signals are held
high while events 1 through 6 specified as breakpoints are established.
Table 3.4 gives pin assignments of the external trigger signal input/event output connectors.
Table 3.4 Pin assignments of external trigger signal input/event output connectors
Pin No. Signal
EXT0/EV0:
1
input/output
EXT1/EV1:
2
input/output
EXT2/EV2:
3
input/output
EXT3/EV3:
4
input/output
EXT4/EV4:
5
input/output
Figure 3.6 External trigger signal input/event output cable
Cable Color Pin No.
White 6
Brown 7
Red 8
Orange 9
Yellow -
22 / 46
Signal Cable Color
EXT5/EV5:
Green
input/output
EXT6/EV6:
Blue
input/output
EXT7/BRKOUT:
Purple
input/output
GND Black
- -