Connecting The Cable To The Emulation Pod - Renesas Emulation Pod M306N4T3-RPD-E User Manual

(2) Connecting the Cable to the Emulation Pod

Figure 3.11 shows how to connect the FLX120-RPD and the emulation pod.
Emulation pod
Figure 3.11 Connecting the Cable to the Emulation Pod
When Connecting the Cable:
• Always shut OFF power before connecting the cable. Otherwise, the internal circuits
may be damaged.
Note on Securing the Screws:
• After connecting the emulation pod and the FLX120-RPD, be sure to secure the
screws mounted in both sides of the connector.
FLX120-RPD (Secure with the screws)
CAUTION
IMPORTANT
( 40 / 76 )