Connecting The Flx120-Rpd To The Emulation Pod - Renesas Single-Chip Microcomputer M306NKT3 User Manual

M306NKT3-RPD-E User's Manual

2.4.2 Connecting the FLX120-RPD to the Emulation Pod

Figure 2.3 shows how to connect the FLX120-RPD and the emulation pod.
Figure 2.3 Connecting the FLX120-RPD to the emulation pod
Note on Connecting the Cable:
Always shut OFF power before connecting the emulation pod and the FLX120-RPD. Otherwise, the internal
circuits may be damaged.
Note on Securing the Screws:
After connecting the emulation pod and the FLX120-RPD, be sure to secure the screws mounted in both sides
of the connector cover.
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
Emulation pod
FLX120-RPD (Secure with the screws)
CAUTION
IMPORTANT
2. Setup
Page 24 of 104