Flowchart To Remedy The Troubles - Renesas Emulation Pod M3062NT3-RPD-E User Manual

Chapter 6. Troubleshooting

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy troubles from when power to the emulator is activated until
the emulator debugger starts up. Check this while the target system is disconnected. For the latest
FAQs visit the Renesas Tools Homepage.
Figure 6.1 Flowchart to remedy troubles
http://www.renesas.com/eng/products/mpumcu/toolhp/faq/m16c/m16c_e.htm
Turning on the power of PC4701
PC4701 Front panel LEDs
Normal
Init dialog box of emulator
debugger displayed
Normal
Error displayed
Program window of emulator debugger displayed
Not normal
1. Check emulator system connections.
See "3.7 Connecting the PC4701" (page 39).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 56).
3. Restart the PC4701 system.
Not normal or error displayed
1. Check the operating environment etc. of the emulator
debugger.
See the emulator debugger user's manual.
2. Reinstall the emulator debugger.
See "6.2 (2) Program Window is Not Displayed at Debugger
Startup (Target Connected)" (page 76).
See "6.2 (3) Errors Occur at Debugger Startup (Target Not
Connected)" (page 77).
( 74 / 84 )