Precautions For Safety - Renesas Emulation Pod M3062NT3-RPD-E User Manual

Preface
The M3062NT3-RPD-E is an emulation pod for the M16C/62 Group M16C/62N and M16C/30
Group M16C/30L of 16-bit MCUs. It is used with a PC4701 emulator.
This user's manual mainly describes specifications of the M3062NT3-RPD-E emulation pod and how
to setup it. For details on the following products, which are used with M3062NT3-RPD-E, refer to
each product's user's manual.
• Emulator:
• Emulator debugger:
All the components of this product are shown in "2.1 Package Components" (page 22) of this user's
manual. If there is any question or doubt about this product, contact your local distributor.

Precautions for Safety

PC4701 User's Manual
M3T-PD30 User's Manual
To use the product properly
• In both this user's manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
• The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
When using outside Japan
• When using in Europe, the United States, or Canada, be sure to use both the emulator
and the emulation pod which meet local standards. EMI standards are not met when
the M3062NT3-RPD-E is used with the PC4700H emulator.
( 3 / 84 )