Flowchart To Remedy Troubles - Renesas Emulation Pod M37641T2-RPD-E User Manual

Chapter 6. Troubleshooting

6.1 Flowchart to Remedy Troubles

Figure 6.1 shows the Flowchart to Remedy Troubles from when power to the emulator is activated
until emulator debugger M3T-PD38 starts up.
Figure 6.1 Troubleshooting when starting up the emulator system
Troubleshooting until the emulator system starts up
Starting up the emulator
(Turn ON the power of emulator and target
system simultaneously)
Check the front panel
LED of the PC4701
Normal
Starting up M3T-PD38 (part 1)
Double-click on the M3T-PD38 icon to start up
M3T-PD38
Init dialog box of the M3T-
PD38 displayed
Normal
Starting up M3T-PD38 (part 2)
Close the Init dialog box (click OK button)
Program Window of the M3T-
PD38 displayed
Normal
Emulator system has started up normally
Not normal/Error displayed
See, "6.1 (1) When the LED Display of the PC4701 is Abnormal"
(page 59).
Not normal/Error displayed
See, "6.1 (2) When the Init Dialog Box is Not Displayed" (page
59).
Not normal/Error displayed
See "6.1 (3) When the Program Window is Not Displayed
(Target System Not Connected) " (page 60) and "6.1 (4) When
the Program Window is Not Displayed (Target System
Connected)" (page 61).
( 58 / 68 )