Flowchart To Remedy The Troubles - Renesas M3062PT-EPB User Manual

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected. For the latest
FAQs visit the Renesas Tool Homepage.
Figure 6.1 Flowchart to remedy the troubles
http://www.renesas.com/en/tools
Turning on PC7501
Front panel LED of PC7501
Normal
Init dialog box of emulator
debugger displayed
Normal
MCU Setting dialog box of
emulator debugger displayed
Normal
Program window of emulator
debugger displayed
Normal
Emulator debugger startup completed
Not normal
1. Check emulator system connections.
See, "3.5 Connecting the PC7501" (page 33).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 48).
3. Restart the PC7501 system.
Not normal/Error displayed
1. Check the operating environment etc. of the emulator
debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.
Not normal/Error displayed
See "6.2 (3) MCU Setting Dialog Box Does Not Appear at
Debugger Startup (target not connected)" (page 73).
Error displayed
See "6.2 (4) Errors Occur at Debugger Startup (target connected)"
(page 73).
( 70 / 80 )