Note On Debugging Operations After Releasing A Reset From The Target; Note On Emulating External Area - Renesas Emulation Pod M3062NT3-RPD-E User Manual

Note on Debugging Operations After Releasing a Reset from the Target:

• Do not execute debugging operations such as setting a software or hardware break, runtime
debugging after releasing a reset from the target system until an interrupt stack pointer (ISP) is set
in the user program.

Note on Emulating External Area:

• To emulate the external area using emulation memory in this product, set 0 wait (8 MHz) or less,
or 1 wait.
IMPORTANT
( 19 / 84 )