Connecting The Pc4701; Connecting The Cable To The Pc4701 - Renesas Emulation Pod M3062NT3-RPD-E User Manual

3.7 Connecting the PC4701

To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
with this product package. Connect the PC4701 side connector of FLX120-RPD to the cable
connector of the PC4701, then secure with screws the FLX120-RPD.

(1) Connecting the Cable to the PC4701

Figure 3.10 shows how to connect the PC4701 and FLX120-RPD
Figure 3.10 Connecting the cable to the PC4701
Notes on Connecting the Cable:
Note on Securing the Screws:
• Always shut OFF power before connecting the cable. Otherwise, the internal circuits
may be damaged.
• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side
connector horizontally with the "UPSIDE" facing up.
IMPORTANT
• After connecting the cable to the emulator main unit PC4701, be sure to secure the
screws mounted in both sides of the connector.
( 39 / 84 )
Emulator main unit
PC4701 side connector of FLX120-RPD
Secure this screw.
CAUTION
"UPSIDE" should face up.
Secure this screw.