Downloading Firmware; Self-Check - Renesas Emulation Pod M3062NT3-RPD-E User Manual

(3) Downloading Firmware

The download procedure is given in Figure 2.3. Before attempting to download the firmware, check
that the emulator is connected to the host machine.
Connect the PC4701 and this product.
Within 2 seconds of turning the power ON, press the
system reset switch of the PC4701 and check it is in
maintenance mode.
Download the firmware using the emulator debugger.
End the emulator debugger and shut the power of the
PC4701 OFF.
Figure 2.3 Firmware download procedure

(4) Self-check

To confirm that your emulation pod works properly, execute the self-check after downloading the
firmware. The self-check procedure is given in Figure 2.4.
Within 2 seconds of turning the power ON, press the
system reset switch of the PC4701 and check it is in
maintenance mode.
Push the system reset switch of the PC4701 again to start
the self-check.
After about 40 seconds, check that the self-check is
complete normally and shut off the PC4701.
Figure 2.4 Self-check procedure
( 26 / 84 )
See "3.7 Connecting the PC4701"
(page 39).
See "4.2 Downloading Firmware"
(page 56).
See "4.3 Self-check" (page 57).