Troubleshooting; Flowchart To Remedy The Troubles - Renesas Single-Chip Microcomputer M306NKT3 User Manual

M306NKT3-RPD-E User's Manual

5. Troubleshooting

This chapter describes how to troubleshoot when this product does not work properly.

5.1 Flowchart to Remedy the Troubles

Figure 5.1 shows the flowchart to remedy troubles from when power to the emulator is activated until the emulator debugger
starts up. Check this while the user system is not connected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on the power of PC4701
PC4701 Front panel LEDs
Init dialog box of emulator debugger
displayed
Editor (source) window of emulator
debugger displayed
Figure 5.1 Flowchart to remedy troubles
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
http://www.renesas.com/en/tools
Not normal
1. Check emulator system connections.
See "2.4 Connecting the PC4701" (page 23).
2. Redownload the firmware.
See "2.6 Downloading Firmware" (page 27).
3. Restart the PC4701 system.
Not normal or error displayed
1. Check the operating environment etc. of the emulator
debugger.
See the emulator debugger user's manual (online
manual).
2. Reinstall the emulator debugger.
Error displayed
See "5.2 (2) Program Window is Not Displayed at Debugger
Startup (User System Connected)" (page 98).
See "5.2 (3) Program Window is Not Displayed at Debugger
Startup (User System Not Connected)" (page 99).
5. Troubleshooting
Page 96 of 104