Game Set Up - Bay-Tek Lil Ticket Monster Service Manual

LIL TICKET MONSTER GAME SETUP
The game will arrive on one pallet.
Please inspect the pallet for shipping damage
and report immediately to the freight company
if any damage is found.
Remove the cardboard from the pallet.
Carefully remove the plastic wrap securing the printed plexi wrapped to the
side of the cabinet. Save this printed plexi for later installation.
Remove the large plastic bag from the cabinet and proceed to assembly
instructions.
Tools Needed:
1 step ladder (4-6 foot)
9/16" wrench
Remove the protection plastic from the front plexi.
Remove the keys from the small plastic bag taped to the top
console.
Unlock the front door using a H95 key.
Important!
Remove the first of 2 shipping bolts
wrench.
There is another shipping bolt accessed from the
back door.
Unlock the coin box door using a A05/E00 key.
Remove the hardware kit (Part # A5KIT-LTM), wood
blocks and service manual from the coin box.
Remove the eyeball light to be installed later.
Close and lock coin box door, remove key to allow the
front door to close fully.
#2 square bit screwdriver
Phillips screwdriver
using a 9/16"
11/32" wrench
7