Game Set Up - Bay-Tek Hyper Nova Service Manual

HYPERNOVA GAME SETUP
The game will arrive on 2 pallets. Please inspect the pallet
for shipping damage and report immediately to the freight
company if any damage is found.
Important:
Portions of this game are heavy bulky, and large. Assembly
requires 2-3 people to lift heavy sections of the cabinet, and ladders that are tall, safe, and
strong enough to position components to the top of the game.
Tools Needed:
1 step ladder (12-15 foot)
9/16" socket
7/16" wrench or socket
Note: Refer to YouTube video at
Unbox lower cabinet and remove the keys from the
front of the game.
Unlock and remove the console access door using
a H95 key.
Remove the 1 front shipping
bolt from the front of the cabinet
using a 9/16" socket wrench.
This bolt can be discarded.
From the rear door, remove the 2
rear shipping bolts from the back of
the cabinet using a 9/16" socket
wrench.
These bolts can also be discarded.
Remove the propeller from the
bottom of the game and unwrap.
Save for later installation.
Remove the lower cabinet from the
pallet.
# 2 Square bit
3 people
https://youtu.be/4pK3kJwIOp4
7
5/32" Allen wrench Philips Screwdriver
1/4" Allen wrench
for a game setup walk through.