Bay-Tek Lil Ticket Monster Service Manual page 42

HOW TO REPLACE SOLENOID
After wheel is supported, remove the retaining ring
and side metal arm from solenoid assembly.
Remove the 6 screws using a Phillips screwdriver.
Remove the center bolt and star washer using a 7/32"
Allen wrench.
Remove the metal plate, and remove the white plastic
spacer from the wheel shaft.
The solenoid assembly (AASO4010) can now be
removed from the wheel shaft.
Upon installation of the new solenoid assembly, make
sure the cable is routed through the metal retaining clip.
This will keep the cable away from the wheel as the
handle moves up and down.
42