Bay-Tek Lil Ticket Monster Service Manual page 12

LIL TICKET MONSTER GAME SETUP
Install the 2 center bolts and nuts under the
monitor.
The printed plexi wrap is secured to small "L"
brackets using a Phillips bolt and nut from the
hardware kit.
A5NULO030
Push the 2 bolts through the printed plexi, through
the hole in the "L" bracket, and secure with the nut
by reaching under the lip of the plexi.
Secure using a Phillips screwdriver and 11/32"
wrench.
Remove the power cord from the coin box, and thread
the power cord through this hole, out the rear of the
cabinet and plug into a grounded outlet.
Power on game:
Open the front door and turn on the rocker switch on the power
strip along the right side of coin box.
The rocker switch is located behind the 1st power cord on the
strip
The game is now set up and ready for play!
Enter menu to adjust settings to your location specific price per play and ticket payout.
A5SCPH230
Under
Plexi
view
12