Table of Contents
Advertisement
Ticket value on the wheel
where arrow is pointing.
Important: The wheel
must be spun downward
for this to be correct.
Graphic
representation
of wheel speed
as it's turning.
Will send one credit pulse to game when the "Add Credit" option is selected.
Will send one ticket enable pulse to dispenser when the "Dispense Tickets" option is selected.
All Menu Options will change to the Factory Default settings when selected.
"Doorboard 1" sections will show:
Total amount of credits in memory
Total amount of tickets owed.
Status of the "Show Mode" dipswitch on the I/O board.
Status of the low ticket switch.
"Wheelboard" sections will show:
Current position of wheel (From 0-32)
Current Ticket Value - The ticket value that arrow is pointing at.
"Notch Sensor" will light as the encoder sensor sees a notch as the wheel is turning.
"Home Sensor" will light as the home sensor sees the metal bracket on side of wheel
"Wheel Engaged" will light when the game thinks it is sending power to the solenoid
DIAGNOSTIC MENU
Revolutions
Per Minute of
wheel as it's
turning.
ENGAGE WHEEL
Press the "Menu Select" button to engage the solenoid.
This will allow the wheel to turn by pushing the plunger down.
DISENGAGE WHEEL
Press the "Menu Select" button to un-power the solenoid.
TEST TICKET DISPENSER
RESET TO DEFAULTS
Brake Status:
Give the wheel a fast spin and allow
it to coast to a stop. This will show "Brake OK"
when brake is set correctly.
ADD CREDIT
21
Explained on
the bottom of
Stop time:
Amount of time the
wheel coasts to a stop
this page.
.
Advertisement
Table of Contents
