Wiring Diagrams - Bay-Tek Lil Ticket Monster Service Manual

FRONT DOOR WIRING DIAGRAM
To 12 Volt Bill Acceptor
Part # A5AC9101
Red is 12 Volts DC
White is Coin Up Signal
Black is Ground
Normally 4-5 VDC between
white and black wires
AACE26008
AACE26014
Power in from
Power Dist Bd
AACB9605-CBL
I/O Aux Board
Red and yellow LEDs are
normally ON at all times.
AACE26013
Power In
from Power
Distribution
Board
AACE26013
Green Power
LED should be
flashing
A5CBL5900
USB Communication
from Motherboard
Coin Switches and Lights
AACBL4A-DOORA
AACE26013
Card Swipe system cable would be
Blue & Black Wires: 5 VDC when notch opto
White & Black Wires: 5 VDC when enabled
AACE26013
AACE26013
AACE26012
24
4-5 VDC normally
on switches.
Goes to 0 when
activated.
UCL Connector
plugged into this connector.
is blocked. 0 VDC when sees a notch.
and tickets are trying to dispense.
To Ticket
Dispenser
Part # A5TD1
AACE26013
Notch Signal
Com Ground
Enable Signal
12 Volt Power
AASW200
Low Ticket Switch
Wired Normally Closed
0 VDC when no tickets on switch.
4-5 VDC when tickets on top of switch.
Ticket
Counter
AACO1020
Game
Counter
Menu Select Button
AAPB2700
Menu Button
4-5 VDC on switches
Ticket meter
clicks as tickets
are dispensed.
Meters
receive 12
VDC pulse
Game meter
clicks at start
of game.
AAPB2700