Table of Contents
Advertisement
LIL TICKET MONSTER GAME SETUP
Hardware kits consist of:
32 of A5SCPH151 used to install the eyeball light and printed plexi wrap.
2 of A5SCPH230 and 2 of A5NULO030 used to secure plexi wrap below
monitor.
1 of A5BOHH060 , 1 of A5WASI020, and 1 of A5WAFL060 are to be
saved with the wood blocks and used to support the wheel in case of
a future solenoid replacement.
A5BOHH060
Unlock the back door using a H95 key.
Remove the back door by using both handles to lift upwards and pull
out.
Important!
Remove the 2nd of 2 shipping bolts using a 9/16"
wrench.
Ensure the shipping bolt from the front door is also
removed.
Replace the back door and remove the game from
the pallet.
Using a ladder, carefully position the eyeball light on
top of the game by positioning it inline with pilot holes.
Secure using 2 of the black screws from the
hardware kit using a #2 square bit screwdriver.
Connect the CE22506 cable from eyeball light to the
game cable CE22505 located in the top of the game.
A5WASI020
A5SCPH151
A5WAFL060
8
A5SCPH151
A5NULO030
A5SCPH230
Advertisement
Table of Contents
