Bay-Tek Lil Ticket Monster Service Manual page 9

LIL TICKET MONSTER GAME SETUP
Rotate upper marquee in place:
Remove the lower bolt (A5BOPH320) from both left
and right sides of marquee arm.
Leave the top bolt in place.
Rotate the marquee upward and re-insert the same
bolts previously removed into the left hole.
Do this on both arms of the marquee.
Install the printed plexi wrap.
Remove the clear protective film from both
sides of the printed plexi wrap.
The idea is to secure one screw into the left
side of the plexi, then wrap it around the game
and install screws into the right side.
The first screw to be installed will be this one.
Line up the printed plexi with this pilot hole and
insert 1 of the black screws from the hardware
kit using a #2 square bit screwdriver.
A5SCPH151
9