Bay-Tek Lil Ticket Monster Service Manual page 41

HOW TO REPLACE SOLENOID
Slowly pivot the wheel cradle downward to rest on wood side
braces.
Before we disassemble the center wheel hub to remove the
solenoid assembly, the wheel itself needs to be supported.
This will prevent the wheel from twisting and causing damage.
There are 2 wood blocks that are shipped with the game in the
coin box, with a bolt, lock washer, and washer.
A5BOHH060
A5WASI020
A5WAFL060
Slide the long narrow piece into the slot of the
other piece to create a shelf.
Install the bolt, lock washer, and washer using a 7/16" wrench as
shown.
Ensure the wheel is supported before continuing.
Note: When re-installing the wheel link to the pivot arm, bring
the arm up toward the rear of the game and attach.
This will make sure the solenoid is swung to the correct
position.
41