3
Soft Front Panel
Data Source Tab
58
The Data Source tab is used to configure the data source (internal/optical)
of the M8121A module.
Figure 18
Data Source tab
This tab has the following options:
•
Data Source - This drop-down list allows the selection of the data
source for the waveform. The available options are; Internal (waveform
memory) and Optical (ODI optical streaming interface). When selecting
Optical, the following controls are available.
•
Optical Data Source - For the optical data source, the following
options are available for channel 1 and 2:
•
Lane Rate - Currently 14.1 Gb/s is the only supported lane rate.
•
Max Burst - This is the maximum burst size and is 2048 (not
adjustable).
Keysight M8121A Arbitrary Waveform Generator User Guide