Keysight M8121A User Manual page 85

Parameter Suffix
Keysight M8121A Arbitrary Waveform Generator User Guide
:ARM[:SEQuence][:STARt][:LAYer]:TRIGger:SLOPe[?]
Command
:ARM:TRIGger:SLOPe POSitive|NEGative|EITHer
Query
:ARM:TRIGger:SLOPe?
Parameters POSitive|NEGative|EITHer
None
Description Set or query the trigger input slope.
• POSitive – rising edge
• NEGative – falling edge
• EITHer – both
Examples Command
:ARM:TRIG:SLOP POS
Query
:ARM:TRIG:SLOP?
:ARM[:SEQuence][:STARt][:LAYer]:TRIGger:STATus{1:2}?
Query
:ARM[:SEQuence][:STARt][:LAYer]:TRIGger:STATus{1:2}?
Description This query returns "1" after the trigger event is received, either from a
trigger signal received at the front panel, or via the "Force Trigger"
command
(:TRIGger[:SEQuence][:STARt]:BEGin{1:2}[:IMMediate]/nquery/).
It returns 0 after playback is stopped (:ABOR).
Examples Query
:ARM:TRIG:STAT1?
Remote Programming
85
6