Keysight M8121A User Manual page 62

3 Soft Front Panel
62
• Waveform Data - Displays the waveform and allows to set the
markers to the waveform data using the waveform toolbar. The
waveform toolbar provides the following buttons:
Uses the mouse to control the marker. The respective position of marker
at X and Y axis are displayed on the top of waveform.
Takes the marker to the peak position
Turns off the marker
Sets the marker on the I data part of the waveform
Sets the marker on the Q data part of the waveform
Provides zoom functionality. Use the mouse pointer to select the area on
waveform that you want to zoom. Once done, you can click Auto scale
icon to zoom out the waveform.
Uses the mouse pointer to move the waveform around. You can also use
the pan tool when the waveform is zoomed in.
Auto scale the waveform
• Load into Channel 1/2 - Click these buttons to load the
waveform data to the respective channels (Channel 1and/or
Channel 2).
Keysight M8121A Arbitrary Waveform Generator User Guide