Arm Commands - Keysight M8121A User Manual

6 Remote Programming

:ARM Commands

Parameter Suffix
Parameter Suffix
82
:ARM[:SEQuence][:STARt][:LAYer]:DELay[1|2][?]
Command
:ARM[:SEQuence]|[STARt][:LAYer]:DELay[1|2][?] <delay>
| MINimum | MAXimum
Query
:ARM[:SEQuence]|[STARt][:LAYer]:DELay[1|2]?
Parameters {<delay> | MINimum | MAXimum}
HZ
Description This command sets or queries the fine delay settings. The unit is in
seconds.
Examples Command
:ARM:DEL1 2e-12
Query
:ARM:DEL1? -> 2e-12
Table 6
Sample Frequency
f ≥ 6.25 GSa/s
Sa
2.5 GSa/s ≤ f
f < 2.5 GSa/s
Sa
:ARM[:SEQuence][:STARt][:LAYer]:CDELay[1|2][?] <coarse_delay>|MINimum|MAXi-
mum
Command
:ARM:CDEL[?]
Long
:ARM[:SEQuence][:STARt][:LAYer]:CDELay[1|2][?]
Parameters <coarse_delay> | MINimum | MAXimum
None
Description Set or query the coarse delay settings. The unit is in seconds.
Examples Command
:ARM:CDEL 3e-9
Fine Delay Settings
< 6.25 GSa/s
Sa
Keysight M8121A Arbitrary Waveform Generator User Guide
Fine Delay Range
0 .. 30e-12
0 .. 60e-12
0 .. 150e-12