Output Commands - Keysight M8121A User Manual

6 Remote Programming

:OUTPut Commands

Parameter Suffix
Parameter Suffix
94
:OUTPut[1|2]:COMPlement[:STATe][?]
Command
:OUTPut[1|2]:COMPlement[:STATe] OFF|ON|0|1
Query
:OUTPut[1|2]:COMPlement[:STATe]?
Parameters
OFF|ON|0|1
None
Description This command switch the complement output on or off.
Examples Command
:OUTP:COMP ON
Query
:OUTP:COMP? -> 1
:OUTPut[1|2]:DIOFfset[?]
Command
:OUTPut[1|2]:DIOFfset <value>|MINimum|MAXimum
Query
:OUTPut[1|2]:DIOFfset?
Parameters
<value>|MINimum|MAXimum
None
Description This command sets the differential offset. The hardware can compensate
for little offset differences between the normal and complement output.
"<value>" is the offset to the calibrated optimum DAC value, so the
minimum and maximum depend on the result of the calibration.
Examples Command
:OUTP:DIOF MAX
Query
:OUTP:DIOF?
Keysight M8121A Arbitrary Waveform Generator User Guide