Keysight M8121A User Manual page 115

Parameter Suffix
Parameter Suffix
Keysight M8121A Arbitrary Waveform Generator User Guide
The <nonzero digit> and sequence of <digit> follow the rules in IEEE 488.2,
Section 8.7.9. An <SCPI header> is defined as: It contains all the nodes
from the root. The <SCPI program mnemonic> contains the node in
standard SCPI format. The short form uses uppercase characters while the
additional characters for the long form are in lowercase characters.
Default nodes are surrounded by square brackets ([]).
Examples Query
:SYST:HELP:HEAD?
:SYSTem:LICense:EXTended:LIST?
Query
:SYSTem:LICense:EXTended:LIST?
Parameters None
None
Description This query lists the licenses installed.
Examples Query
:SYST:LIC:EXT:LIST?
:SYSTem:SET[?]
Command
:SYSTem:SET <binary block data>
Query
:SYSTem:SET?
Parameters
<binary block data>
None
Description In query form, the command reads a block of data containing the
instrument's complete set-up. The set-up information includes all
parameter and mode settings, but does not include the contents of the
instrument setting memories or the status group registers. The data is in a
binary format, not ASCII, and cannot be edited.
In set form, the block data must be a complete instrument set-up read
using the query form of the command.
This command has the same functionality as the *LRN command.
Examples Command
:SYST:SET <binary block data>
Remote Programming
115
6