Table of Contents
Advertisement
Post Installation Steps
Keysight M8121A Arbitrary Waveform Generator User Guide
Follow the post installation steps as shown below:
1
Shut down PC and instrument.
2
Connect the instrument to the PC using the PCIe cable.
3
Switch on the instrument. Wait until the 'Access' LED is solid green (no
longer flashing). Red indicates an error condition.
4
Switch on the PC.
5
The PC should automatically recognize the instrument.
Check this in the device manager; e.g. via Start > Control Panel > Device
Manager, or right-click Computer > Manage > Device Manager.
The instrument should be visible in the device tree as Keysight
Technologies Modular Devices > M8121A
Post installation steps must be followed strictly in the same order as
NOTE
mentioned for successful connection of the PC with M8121A.
Your PC might request a reboot. Reboot your PC, if requested.
NOTE
6
Check if the M8121A is also visible in the Keysight Connection Expert
application.
7
If something went wrong and the instrument is not showing in the
Instruments tab in Keysight Connection Expert, it may be necessary to
reboot the PC once more.
Installation and Maintenance
2
31
Advertisement
Table of Contents
