Keysight M8121A User Manual page 97

Command Syntax
Query Syntax
Parameter Suffix
Parameter Suffix
Keysight M8121A Arbitrary Waveform Generator User Guide
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:HIGH[?]
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:HIG
H <level>
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:HIG
H?
Parameters
<level>
None
Description This command sets or queries the high level for the DAC or DC output
path, as specified in the SCPI command.
The output path can also be set using the OUTP:ROUT:SEL command
(see :OUTPut[1|2]:ROUTe[:SELect][?] DAC|DC
Examples Command
:DAC:VOLT:HIGH 3e-1
Query
:DAC:VOLT:HIGH?
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:LOW[?]
Command
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:LOW
<level>
Query
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:LOW
?
Parameters
<level>
None
Description This command sets or queries the low level for the DAC or DC output
path, as specified in the SCPI command.
The output path can also be set using the OUTP:ROUT:SEL command
(see :OUTPut[1|2]:ROUTe[:SELect][?] DAC|DC
Examples Command
:DAC:VOLT:LOW -0.3
Query
:DAC:VOLT:LOW?
Remote Programming
on page 95).
on page 95).
6
97