Data Rates Tab - Keysight MIPI M-PHY User Manual

Data Rates Tab

Keysight MIPI M-PHY Frame Generator User Guide
In the Data Rates Tab (see
connected with the Reference Clock as well as the High-Speed and
Low-Speed Data Rates.
The parameter values can be entered numerically or by using the slider
that appears when you click the corresponding parameter field. You can
set the minimum, default or maximum level quickly by clicking the buttons
directly above the slider.
Figure 18
Parameters in the Data Rates Tab
• Ref. Clock Frequency: Select from 19.2, 26, 38.4 and 52MHz for
M8040A. For BIT-3000 only the first three are available.
Figure 18) you can change parameters
Data Rates Tab
Using the Software 5
47