6
Remote Programming
:SOURce Commands
Parameter Suffix
Command Syntax
Query Syntax
Parameter Suffix
96
[:SOURce]:DAC|DC[1|2]:FORMat[?]
Command
[:SOURce]:DAC|DC[1|2]:FORMat DNRZ|NRZ|DOUBlet
Query
[:SOURce]:DAC|DC[1|2]:FORMat?
Parameters
DNRZ|NRZ|DOUBlet
None
Description
This command sets or queries the DAC format mode.
Examples
Command
:DAC:FORM DNRZ
Query
:DAC:FORM? -> DNRZ
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:AMPLitude[?]
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:AMP
Litude <level>
[:SOURce]:DAC|DC[1|2]:VOLTage[:LEVel][:IMMediate]:AMP
Litude?
Parameters
<level>
None
Description
This command sets or queries the amplitude for the DAC or DC output
path, as specified in the SCPI command.
The output path can also be set using the OUTP:ROUT:SEL command
(see
:OUTPut[1|2]:ROUTe[:SELect][?] DAC|DC
Examples
Command
:DAC:VOLT:AMPL 0.685
Query
:DAC:VOLT:AMPL?
on page 95).
Keysight M8121A Arbitrary Waveform Generator User Guide