Keysight M8121A User Manual page 100

6 Remote Programming
Parameter Suffix
Parameter Suffix
100
Examples Command
:CARR1:FREQ:FRAC 1e-9
Query
:CARR1:FREQ:FRAC?
[:SOURce]:CARRier[1|2]:FREQuency:INTegral[?]
Command
[:SOURce]:CARRier[1|2]:FREQuency:INTegral[?]
<frequency_integral>|MIN|MAX|DEFaultetegral>|MIN|MAX|DEFault
Query
[:SOURce]:CARRier[1|2]:FREQuency:INTegral[?]
<frequency_integral>|MIN|MAX|DEFault
Parameters
<frequency_integral> | MIN | MAX | DEF
None
Description This command sets or queries the integral part of the carrier frequency
used for interpolated modes.
<frequency_integral> – Integral part of the carrier frequency (in Hz)
Examples Command
:CARR1:FREQ:INT 1e9
Query
:CARR1:FREQ:INT?
[:SOURce]:CARRier[1|2]:POFFset [?]
Command
[:SOURce]:CARRier[1|2]:POFFset <phase- offset>
|MINimum|MAXimum|DEFaultency_integral>|MIN|MAX|DEFaul
t
Query
[:SOURce]:CARRier[1|2]:POFFset?
Parameters
<phase-offset> | MIN | MAX | DEF
None
Description This command sets or queries the carrier phase offset used for
interpolated modes.
Keysight M8121A Arbitrary Waveform Generator User Guide