Keysight M8121A User Manual page 103

Parameter Suffix
Parameter Suffix
Keysight M8121A Arbitrary Waveform Generator User Guide
[:SOURce]:FREQuency:RASTer:SOURce[?]
Command
[:SOURce]:FREQuency:RASTer:SOURce
INTernal|EXTernal|LPNoise
Query
[:SOURce]:FREQuency:RASTer:SOURce?
Parameters
INTernal|EXTernal|LPNnoise
None
Description This command sets or queries the selected clock source for the module.
When switching to EXTernal a stable sample clock that matches the
frequency set with must be supplied at SCLK IN.
External is the LPN Clk In and therefore this command replaces
NOTE
[:SOURce]:FREQuency:RASTer:LPNoise,
[:SOURce]:FREQuency:RASTer:LPNoise:ACTive,
[:SOURce]:FREQuency:RASTer:LPNoise:ENABle
Examples Command
:FREQ:RAST:SOUR INT
Query
:FREQ:RAST:SOUR?
[:SOURce]:FREQuency:RASTer:STATus[1:2]?
Query
[:SOURce]:FREQuency:RASTer:STATus[1:2]?
Parameters None
None
Description This queries the status of clock stability for each channel. It reflects the
Clock LED status on the soft front panel.
Examples Query
FREQ:RAST:STAT1?
Remote Programming
103
6