Table of Contents
Advertisement
Model 4000C Instruction Manual
Error List
USER PROGRAMMABLE CUSTOM HEADER
OPEN
OPEN
OPEN
SHORT
SHORT
Failed 0000/0001
Error List
USER PROGRAMMABLE CUSTOM HEADER
OPEN
OPEN
OPEN
SHORT
SHORT
Failed 0000/0001
Random Build
This mode provides harness assembly where wire placement does not require a specific order.
A complete procedure is provided below. To select and use RANDOM BUILD in making
circuit connections, proceed as follow:
1. Load program into memory (refer to Loading a Program).
2. Attach wrist strap to arm, and plug wrist strap lead into PROBE receptacle on the Control
Head.
3. Plug footswitch lead into FOOTSWITCH jack on the rear panel.
4. Connect the harness assembly fixture.
5. Press RANDOM BUILD key; the display will show:
6. Touch the end of a random wire to assemble, and the display will show the From/To
points.
From Pt.
To Pt.
3
12
1
10
8
16
3
10
8
12
From Pt.
To Pt.
J1-3
P1-3
J1-1
P1-1
J1-8
E2
J1-3
P1-1
J1-8
P1-3
Figure 4. Sample Error List Printouts
Select Next Wire
11-26-96
Circuit ID
11-26-96
Circuit ID
Page 23
Without
User Labels
With
User Labels
Advertisement
Table of Contents
