Table of Contents
Advertisement
If the unit is not used for a long period of time, the batteries should be removed.
It is recommended to replace the batteries already when the capacity is down to 10%.
5.18 Connection to PC
The unit is equipped with USB 2.0 as standard. With the optional available cable the
connection to the PC is possible. The measurement data stored in the unit's memory
can be transferred via this cable.
For detailed information on the communication software, please read the software
manual.
6. Operation of the menu
Both, the pre-setting of parameters and the additional function, are realised by the
menu operation. The key
6.1 Access to the main menu
Press the key to
6.2 Access to the submenu
Press the key to
6.3 Change the parameter
Press the key
to change the value of the parameter on the display set to Parameter.
6.4 Numerical digital input
Press the key
several times to move to the number to be changed; use the and
keys to
increase or decrease the numerical value on the display until you reach the
desired numerical value.
6.5 Saving and exiting the menu
Press the key
to confirm any changes and return to the previous page of the screen.
6.6 Deleting and exiting the menu
Press the key to
7. Maintenance
If any unusual problems occur with your measuring instrument, please do not repair or
disassemble it at your own risk. The enclosed warranty certificate should be filled in
and the instrument sent to us. The maintenance will then be carried out by us.
8. Transport and storage
• The measuring instrument must not be exposed to vibrations, strong magnetic
fields, decomposing media or dust and must not be subjected to rough handling.
It should be kept at normal temperature.
TU_US-BA-e-2020
provides access to the main menu.
access and exit the main menu.
access the submenu.
delete any changes and return to the previous screen page.
19
Advertisement
Table of Contents
