Table of Contents
Advertisement
4.13 Automatic switch-off
The device has an automatic switch-off function to save the batteries. If no button is
pressed for more than 5 seconds, the unit switches off automatically.
It also switches off when there is insufficient battery voltage and the battery is almost
exhausted.
4.14 Basic setting of the system (Reset)
The key
is pressed during power-up to restore the factory settings. All memory data
is also deleted. This procedure can be helpful if the parameter in the meter has become
unusable.
4.15 Connection to PC
The device TN xx0.01 US is equipped with the standard RS-232 adapter connection.
With the optionally available cable the connection to a PC or external storage devices
is possible. The measurement data stored in the instrument memory can be transferred
via this cable through the RS-232 access.
For detailed information on the communication software, please read the software
manual.
5. Maintenance
If you experience any unusual problems with your US thickness gauge, please do not
repair, replace or disassemble it at your own risk. The enclosed warranty card should
be filled out and the gauge returned to us. The maintenance will then be carried out by
us.
6. Transport and storage
1. The meter should not be exposed to vibrations, strong magnetic fields,
decomposing media or dust, and should not be handled roughly.
It should be kept at normal temperature.
18
TN_US-BA-e-2020
Advertisement
Table of Contents
