Disk Led - NEC Express 5800/320Lc User Manual

PCI Board Slot Status LEDs (P1, P2, P3)
To show the status of PCI board slots, each PCI module has three status LEDs.
LED
Description
indications
Off PCI board is mounted
correctly and operates
in duplex mode.
The PCI board is not
mounted; is mounted
incorrectly; or power
is not supplied.
Amber PCI board is mounted
correctly and operates
in simplex mode.
Red Although the PCI
board is mounted, it
may be offline or not
be working.
For LED indications when option boards are attached, see "PCI Module" in Chapter 8.

Disk LED

A DISK LED shows the status of a hard disk that is mounted in a slot of the 3.5-inch hard disk drive
bay. Combined, the disk LEDs on PCI modules 1 and 2 show the status of the hard disks.
PCI PCI
module 1 module 2
Green/Off* Green/Off*
Green/Off* Amber
Green Amber
Amber Green/Off*
Amber Green
Amber Amber
* The DISK LEDs becomes off (blinks) when the hard disk drive is accessed.
Action
The system operates normally.
If the PCI board is not mounted or is mounted
incorrectly, just mount it correctly; there is no problem.
Check the condition of power unit.
If the problem persists, contact your sales agent.
Simplex mode is not a problem.
To make the server fault-tolerant, attach a PCI board
to a slot of the same on the other PCI module.
Remount the PCI board correctly.
Remount the PCI module correctly.
If the problem persists, contact your sales agent.
Description
The hard disk drives are mirrored
and operating normally.
Mirroring the DISKs by the RDR
function.
Some trouble occurred on a hard
disk of the PCI module 1.
The hard disk drive in the PCI
module 2 is running without
mirror.
Mirroring the DISKs by the RDR
function.
Some trouble occurred on a hard
disk of the PCI module 2.
The hard disk drive in the PCI
module 1 is running without
mirror.
Mirroring DISK
Management.
General Description
Action
Wait for the mirroring to be
completed.
Reconfigure the hard disk mirror.
(See "DISK OPERATIONS" in
Chapter 3, Windows Setup and
Operation)
If the problem persists, contact
your sales agent.
Wait for the mirroring to be
completed.
Reconfigure the hard disk mirror.
(See "DISK OPERATIONS" in
Chapter 3, Windows Setup and
Operation)
If the problem persists, contact
your sales agent.
by Disk Wait until the mirroring is finished.
2-33
-