NEC Express 5800/320Lc User Manual page 149

See the table below for setup options on the screen.
Option
On Board SCSI
On Board LAN 1, 2
PCI Slot 1 - PCI Slot 3
IMPORTANT:
For the slot which a graphical accelerator board is installed, do not specify "Disabled".
Parameter Description
Disabled Enable or disable expansion of SCSI
BIOS on the motherboard.
[Enabled]
Disabled LAN1: Enable or disable 10/100BASE
LAN controller on the
[Enabled]
motherboard.
LAN2: Enable or disable 1000BASE
LAN controller on the
motherboard.
Disabled Enable or disable BIOS on a device
(board) connected to the PCI bus.
[Enabled]
Select "Enabled" for the graphic
accelerator board.
Select "Disabled" for Option ROM of
PCI LAN device when the network
boot feature is not used.
System Configuration
Your Setting
#1:
#2:
#3:
[ ]: Factory-set
4-17