NEC Express 5800/320Lc User Manual page 234

5-58 Installing and Using Utilities
Procedure in NEC ESMPRO Manager
Save the image data of the update firmware in an arbitrary directory of the NEC
1.
Express5800/ft series.
Save the image data in any way. Write down the path to the directory in which the image
data is saved.
Select the target component in the [FTServer] tree.
2.
Check the current state with the "State" display on the target component screen. If the
3.
component is operating, stop the component.
Click the [Firmware Update] button in the [Update] screen for the target component.
4.
Sample screen of NEC ESMPRO Manager
Select [Specify the file path to update], enter the
5.
directory in which the updated firmware specified in the
input box in step 1 is saved, and click the [Execute]
button.
Perform the firmware update.
The update result can be confirmed by the state on the
target component screen (indication of "Firmware
update completed"). The result of the update processing
is reported by the NEC Express5800/ft series as an alert.
After the BIOS for a single CPU module is completed, click the [Jump Switch] button.
6.
The module completely updated is started and the active module is stopped.
[Update] screen of CPU module
[CPU Module] – [Update]