Check The Duplicating Operation Of Modules; Evaluate Startup And Stop Of Pci Modules - NEC Express 5800/320Lc User Manual

3-46 Windows Setup and Operation
CHECK THE DUPLICATING OPERATION OF
MODULES
This section describes how to check if the system runs properly after system installation or
reinstallation.

Evaluate Startup and Stop of PCI Modules

This section describes how to confirm the continuous system operation by failover after stopping the
primary PCI module.
1.
Check which is the primary PCI module.
The PCI module with the POWER switch illuminated is the primary module.
2.
Check whether the PCI modules are duplicated.
To check if the PCI modules are duplicated, see the PCI modules' status LEDs.
[
Indications of the status LEDs when PCI modules are duplicated
BMC status LED
1
PCI module status LED1
2
PCI module status LED2
3
4 DISK ACCESS LED
DISK LED
*
The numbers in the table correspond to the numbers in the above figure.
The DISK ACCESS LED (4) lights when the hard disk drive is accessed.
LED
]
Primary
Green
-
Green
Green or off
Green
Secondary
-
-
Green
Green or off
Green