Table of Contents
Advertisement
3-20
Windows Setup and Operation
6.
Confirm that the DISK LEDs and the display of RDR utility change as shown below:
Synchronizing
Source disk
Destination disk
RDR Virtual Disk
IMPORTANT:
The time required for synchronization varies depending on the partition size on the disk.
For 18GB partition, it takes about 16 minutes.
If there is no partition, synchronization may complete in a short period of time and the
disk may become synchronized after RDR is set.
If the system is rebooted during synchronization, the process cannot be completed. Do
not restart the system until the synchronization is completed.
DISK LED
Amber
Green
RDR Utility
Op State: State
Simplex
Syncing
Simplex
Status
Resync x percent
(x=0, 10, 20, ..., 90)
Advertisement
Table of Contents
