Configuration Settings - NEC Express 5800/320Lc User Manual

4-32 System Configuration

Configuration Settings

If you select "Configuration Settings" from the "Fast!UTIL Options" menu, the screen for setting
the configuration appears.
Host Adapter Settings
If you put the cursor on "Host Adapter Settings" with keyboard cursors (↓ and ↑) in the
"Configuration Settings" menu and press Enter, the screen for setting the information on the host
adapter appears.
The table below shows the parameters of the setting items and their factory settings.
Submenu item
BIOS Address
BIOS Revision
Adapter Serial Number
Interrupt level
Host Adapter BIOS
PCI Bus DMA Burst
CDROM Boot
Adapter Configuration
Drivers Load RISC
>4GByte Addressing
Fast Command Porting
Configuration Settings
Host Adapter Settings
SCSI Device Settings
SCSI Bus Settings
Autoconfigure SCSI Device
Selectable Boot Settings
Restore Default Adapter Settings
Raw Nvram Data
Parameter Description
- View only
- View only
- View only
- View only
[Enabled] Specify whether the BIOS extension of the host
adapter is enabled or disabled.
Disabled
[Enabled] Specify whether the DMA burst transfer on the PCI
bus is enabled or disabled.
Disabled
Enabled Specify whether the start from CD-ROM is enabled or
disabled.
[Disabled]
[Auto] Specify whether the adapter configuration is set
automatically by BIOS, manually, or safely.
Manual
Safe
[Enabled] Specify whether the load of RISC codes is enabled or
disabled.
Disabled
Enabled Specify whether hard disks of 4 GB or larger is used
or not.
[Disabled]
[Enabled] Do not change the factory setting.
Disabled
[ ]: Factory-set