Table of Contents
Advertisement
8-30
System Upgrade
5.
Hold the release levers of the PCI module and pull it off.
The PCI module is slightly pulled out toward you.
IMPORTANT:
6.
Pull off the module halfway slowly. Pushing down the latch lever on the side to unlock it,
pull the module off the rack.
IMPORTANT:
it against other server internal devices.
Release lever
7.
Carefully place the PCI module on the flat and sturdy table.
Avoid the dusty or humid place.
8.
Remove the two setscrews on the front of the PCI module and one setscrew on the back.
9.
Slide the top cover a little to remove it.
This allows you to access the devices in the PCI module. For more information on how to
handle these devices, see the associated sections.
Do not hold the other parts than the release levers to pull the module.
Carefully handle the PCI module so that you will not drop it or strike
Latch lever
Advertisement
Table of Contents
