NEC Express 5800/320Lc User Manual page 143

Advanced
Select "Advanced" on the Advanced menu to display the following screen.
Boot-time Diagnostic Screen:
RomPilot S
POST Erro
F1 Help
Esc Exit
See the table below for setup options on the screen.
Option
Boot-time
Diagnostic Screen
RomPilot Support
Post Error Pause
TIPS:
"RomPilot" is a BIOS feature for communications with the NEC Management Workstation
Application (NEC MWA). To use the NEC MWA for management of the server, select "Enabled"
for "RomPilot Support." Use of the RomPilot features requires setups for the NEC MWA.
Phoenix BIOS Setup Utility
Advanced
Advanced
[Disabled]
upport: [Disabled]
r Pause: [Enabled]
-/+
Select Item
Enter Select
Select Menu
Parameter Description
[Disabled] Specify whether to display the Power On
Self-Test (POST) screen at start-up. If
Enabled
"Disabled" is selected, the NEC logo
appears while POST is in progress. (To
display POST check results, press Esc.)
If "RomPilot Support" is set to "Enabled" or
"Console Redirection" is set, this option is
unconditionally set to "Enabled".
[Disabled] Enable or disable the RomPilot (the remote
console and remote drive features during
Enabled
OS start-up). If this option is set to
"Enabled", "Boot-time Diagnostic Screen" is
unconditionally set to "Enabled".
[Enabled] Specify whether to stop POST at the end of
POST when an error occurs during POST.
Disabled
Display the diagnostic
screen during POST
instead of the Logo.
The boot-time d
screen is redirection
or rompilot is
Select Item
Select Menu
Change Values
F9 Setup Defaults
Sub-Menu F10 Save Changes & Exit
System Configuration
Item Specific Help
iagnostic
enabled.
Your Setting
[ ]: Factory-set
4-11