NEC Express 5800/320Lc User Manual page 357

N8104-84 1000BASE-SX Adapter
Consult your sales personnel for details when purchasing this hardware.
IMPORTANT:
Note the following about this product:
It is advisable to add this product to such environment that each system is used for a different
purpose (ex. system line, maintenance, monitoring) and multiple accesses do not occur
simultaneously.
If there are multiple accesses, the processing power and transmission speed may be somewhat
affected.
Slots to install the board
N code
N8104-84
√: Can be installed.
Installation of driver
The NEC Express5800/ft series uses a pair of N8104-84 boards in duplex mode.
After installing the drivers in the following procedure, perform a dual configuration setup.
IMPORTANT:
you use the floppy disk provided with the network card, it will not operate properly.
(PROSetII will not start.)
TIPS:
To perform this procedure, you have to log on the system as an Administrator or a
member of the Administrators group.
After installing the OS, follow the steps below to install a driver and establish a dual
configuration:
1.
Mount the N8104-84 adapter to the slot with the same number in PCI module #1 and #2,
and then start the Windows Server 2003, Enterprise Edition.
After starting Windows Server 2003, Enterprise Edition, the drivers are installed
automatically.
IMPORTANT:
button.
Name
1000BASE-SX Adapter
–: Cannot be installed.
Please use the CD-ROM for NEC Express5800/ft series for installation. If
If the [Digital Signature Not Found] dialog box appears, click the [Yes]
PCI slot
Group 1 Group 2
#1 #2 #3 #1
√ √
– –
System Upgrade
Remarks
#2 #3
√ √
Each PCI module
can contain one
board only.
8-47