Configuration Menu; Code Lock - ESAB PEK A2 Instruction Manual

GB
The following menu appears:
In this example we
change the welding
current from 400 A to
500 A.
Press QUIT twice.
The setting for weld data number 5 has now been edited and stored.
8

CONFIGURATION MENU

Main menu ³ Configuration menu
This menu contains the following sub−menus:
S Language, see chapter 1.2.1 "Choice of language"
S Code lock, see chapter 8.1
S General settings, see chapter 8.2
S Machine settings, see chapter 8.3
S Cable length, see chapter 8.4
S Maintenance, see chapter 8.5
8.1

Code lock

Main menu ³ Configuration menu ³ Code lock
When the lock function is activated and you are in the measure screen, remote
mode or fast mode menu, a password (lock code) is required to exit from these
menus.
Code lock is activated in the configuration menu.
bi24d1ea
SAW WELD DATA SETTING
VOLTAGE
CURRENT
TRAVEL SPEED
DIRECTION
START DATA
"
STOP DATA
"
DYNAMIC REGULATION
SETTING LIMITS
"
MEASURE LIMITS
"
CODE LOCK
LOCK STATUS
SET / CHANGE LOCK CODE
− 32 −
20.0 V
500 A
0 cm/min
J
ON
QUIT
OFF
QUIT