General Settings; Fast Mode Soft Keys - ESAB PEK A2 Instruction Manual

GB
8.2

General settings

Main menu ³ Configuration menu ³ General settings
In this menu you can set:
Fast mode soft keys, see chapter 8.2.1
S
S Quality data log to file, see chapter 8.2.2
S Setting soft keys, see chapter 8.2.3
S Automatic weld data storage, see chapter 8.2.4
S Unit of length, see chapter 1.2.2 "unit of measurement"
8.2.1

Fast mode soft keys

The soft keys WELD DATA 1 up to and including WELD DATA 4 are displayed in the
fast mode menu.
These are configured as follows:
Position the cursor on
the row for SOFT KEY
NUMBER.
The keys are numbered 1−4 from left to right. Select the desired key by giving its
number using the setting knobs.
bi24d1ea
SAW: CA
A 450 Amp
V 30.0 Volt
50 cm/min
WELD WELD
DATA 1 DATA 2
FAST MODE SOFT KEYS
SOFT KEY NUMBER
ASSOCIATED WELD DATA
SAW: CA: FE SOLID: 0.8 mm
20.0 V: 500 A: 0 cm/min
STORE
− 34 −
WELD WELD
DATA 3 DATA 4
DELETE
16
2ND
FUNCT
1
5
QUIT