Tools; Error Log - ESAB PEK A2 Instruction Manual

GB
9

TOOLS

Main menu ³ Tools
This menu contains the following sub−menus:
S Error log, see chapter 9.1
S Export/Import, see chapter 9.2
S File manager, see chapter 9.3
S Edit setting limits, see chapter 9.4
S Edit measure limits, see chapter 9.5
Production statistics, see chapter 9.6
S
Quality functions, see chapter 9.7
S
Calendar, see chapter 9.8
S
S User accounts, see chapter 9.9
S Unit information, see chapter 9.10
9.1

Error log

Main menu ³ Tools ³ Error log
Fault management codes are used to indicate that a fault has occurred in the
welding process. Indicated in the display via a pop−up menu and an exclamation
mark appears in the upper right−hand corner of the display.
Note! disappears from the display as soon as you enter the error log menu.
All errors that arise during the use of the welding equipment are documented as
error messages in the error log. Up to 99 error messages can be saved. If the error
log becomes full, i.e. if 99 error messages have been saved, the oldest message is
automatically deleted when the next fault occurs.
The following information can be read in the error log menu:
S The error number of the error
The day on which the error occurred
S
S The time at which the error occurred
S The unit in which the error has occurred
S The error's error management code
bi24d1ea
− 42 −