Measurements Menu - ESAB PEK A2 Instruction Manual

GB
2.1.4

Measurements menu

Main menu ³
In MEASURE, you can view measured values for various welding parameters while
welding is in progress.
A 450 AMP
Measured welding
current
30.0 Volt
Measured arc voltage
50 cm/min
Measured travel speed
300 cm/min
Measured wire feed
speed
30 kJ/cm
Indicates energy per
unit length, which is
obtained using the
values selected for
welding current, arc
voltage and travel
speed
The measured values remain in the display even after welding has been completed.
You can move to different menus without losing the measurement values.
The settings knobs can be used to change the welding parameters in the
measurement display.
If the set value is changed when welding is not in progress, the measurement value
changes to zero.
bi24d1ea
SAW: CA
A 450 Amp
V 30.0 Volt
NONE NONE
SAW: CA
50 cm/min
300 cm/min
30.0 kJ/cm
NONE NONE
− 14 −
50 cm/min
GAS /
FLUX NONE
GAS /
FLUX NONE
|
|
|
|
|
|
2ND
FUNCT
|
|
|
|
|
|
2ND
FUNCT