GB
2.1.6
Fast mode menu
Main menu ³
In the FAST MODE
menu, you can "link"
soft keys to weld data
memory positions.
These settings are
carried out in the
Configuration menu.
The number of the
selected memory
position is displayed in
the top right corner.
For further information, see the chapter 8.2.1 "Fast mode soft keys".
3
SUBMERGED ARC WELDING
Main menu ³ Process
During Submerged Arc Welding (SAW), an arc melts a continuously supplied wire.
The weld pool is protected by flux.
When the submerged arc welding process is selected, you can choose between two
control methods by marking REGULATION TYPE using the positioning knob and
pressing ENTER. Choose between constant welding current CA or constant wire
feed CW, see explanation in chapter 6.1 and 6.2.
bi24d1ea
A
450 Amp
V
30.0 Volt
50 cm/min
WELD
WELD
DATA 1
DATA 2
− 16 −
WELD
WELD
DATA 3
DATA 4
16
2ND
FUNCT